Indicator
The color of the indicator shows the battery level or abnormality.
Note: When the battery level is below 10%, the indicator will stop flashing and the speed is capped at
5.0 mph (8 km/h).
The flashing way of the indicator shows dierent speed mode.
Prompt Indication
Power button:
Place a single foot on the footboard to start the kickscooter, then you will hear one beep as the
prompt. Take both feet o the footboard for 30 seconds and the kickscooter will automatically power
o.
Rear fender:
● Switch speed mode: In the power-on state, when the kickscooter is still, step the rear fender twice
to switch the speed mode.
● Brake: When riding, step on the rear fender to brake.
Thanks for choosing the Ninebot eKickScooter (referred to as the kickscooter in this manual)!
The kickscooter is specially designed for smooth and safe riding. It combines the power of electricity
and the style of a traditional kickscooter. Enjoy an effortless gliding experience on this cool kickscooter.
1. Parts and Functions
Footboard/Power button
Ambient light
Front wheel
Hub motor
Clamp
Charging port
Handlebar
Indicator
Rear fender
Reflector
Stem
Accessories:
Battery charger 3/16″(5 mm) Allen wrench
Battery level
Indicator color
≥ 10%
white
< 10%
red
Not activated or abnormality alert
red
Speed mode
Max. speed
Indicator
First-gear speed
5.0 mph (8 km/h)
solid, with 1 beep
Second-gear speed
6.2 mph (10 km/h)
blink slowly, with 2 beeps
State
Not activated
Battery temperature too high
Battery temperature too low
Speed＞6.2 mph (10 km/h)
Battery level: ＜ 10%
Pull out and plug in the charger
Power on
Power off
Prompt
3 short beeps
2 short beeps and 1 long beep
2 short beeps and 2 long beeps
2 long beeps
2 short beeps
1 short beep
1 short beep
1 long beep
01 02
To Next Page
Loading...
Need help?
General
