How to disassemble ZING C8, ZING C10
Loosen the quick-release clamp.
Press the quick-release button.
Lift the stem up to detach it from the front fork.
1
2
3
Appendix: Disassembly or Folding
Folding and Unfolding ZING C15E, ZING C20
Fold the stem and lock the folding
clasp into the buckle on the rear
fender.
Safety clamp
Note: The following steps should be operated after powering off the scooter.
Unfolding
Lift the folding clasp out of the
buckle. Upright the stem and
secure the folding clamp.
* The safety clamp should reach
the returning mark when the
folding clamp is secured.
Carrying
After folding the scooter, grip it tightly and hold the stem to carry it.
Folding
Hold the stem, loosen the safety clamp
and the folding clamp.
Folding clamp
Contact us if you experience issues relating to riding, maintenance and safety, or errors/faults with your scooter.
Europe, Middle East and Africa:
Segway-Ninebot Europe, Dynamostraat 7, 1014 BN Amsterdam, The Netherlands
Website: www.segway.com
Have your scooter serial number on hand when contacting Segway.
You can find the serial number on the underside of your scooter.
11. Contact
1817
Buckle
Folding clasp
Returning mark
To Next Page
Loading...
Need help?
General