EasyManua.ls Logo

Ningbo FPP-72743 - User Manual

Ningbo FPP-72743
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OWNER’S
MANUAL
INSTALLATION, OPERATION, & PARTS
FPP-72743 / 72744
MANUFACTURED BY:
NINGBO SPLASH POOL APPLICANCE CO., LTD
To prevent potential injury and to avoid unnecessary service calls, read this manual
carefully and completely.
SAVE THIS INSTRUCTION MANUAL
Use of appointed replacement parts voids warranty.
ATTENTION INSTALLER THIS MANUAL CONTAINS IMPORTANT INFORMATION ABOUT THE
INSTALLATION, OPERATION, AND SAFE USE OF THIS PUMP THAT MUST BE FURNISHED TO THE END
USER OF THIS PRODUCT. FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS COULD RESULT IN
SERIOUS INJURIES.
Question and Answer IconNeed help?

Do you have a question about the Ningbo FPP-72743 and is the answer not in the manual?

Summary

CHAPTER One: IMPORTANT SAFETY INSTUCTIONS

WARNING Pay Attention to Children

Safety guidelines for children around pool pumps and filtration systems.

WARNING Risk of Electric Shock

Critical electrical safety warnings, including grounding, GFCI, and wiring requirements.

WARNING Suction Entrapment Hazard

Details hazards related to suction inlets and how to prevent entrapment.

WARNING Hazardous Pressure

Covers risks associated with system pressure during operation and maintenance procedures.

WARNING Separation Hazard

Explains risks of component separation due to improper handling or operation.

WARNING Fire and Burn Hazard

Addresses fire risks from motor heat and burn hazards during maintenance.

CHAPTER Two: Installation Instructions

Pump Location

Guidelines for selecting a suitable and safe location for pump installation.

Pump Mounting

Instructions for securely and properly mounting the pump unit for stability.

Plumbing

Procedures for connecting the pump to the pool's plumbing system using specific materials.

Fittings

Recommendations on using appropriate fittings for optimal flow and safety.

CHAPTER Three: Electrical

Grounding and Bonding

Essential steps for grounding and bonding the motor for electrical safety.

Wiring

Instructions for correctly wiring the pump, including GFCI requirements and wire sizing.

CHAPTER Four: Start-Up & Operation

Prior to Start-Up

Pre-operation checks and safety precautions before initial pump startup.

Priming Pump

Steps to prime the pump to ensure proper water flow and operation.

CHAPTER Five: Maintenance

Cleaning and Inspection

Regular cleaning of the strainer basket and inspection of the cover gasket.

CHAPTER Six: Storage;Winterization

Storing Pump For Winterization

Procedures for draining and storing the pump to prevent damage during cold weather.

CHAPTER Seven: Troubleshooting

Motor Will NOT Start

Diagnosing and resolving issues when the motor fails to start.

Motor Shuts OFF

Identifying reasons for the motor shutting off unexpectedly due to overload or voltage issues.

Motor Hums, But Does NOT Start

Troubleshooting a motor that hums but does not run, possibly due to impeller blockage.

Pump Wont Prime

Steps to resolve problems where the pump fails to prime, checking for leaks and air.

Low Flow - Generally

Common causes and solutions for reduced water flow, such as clogs or piping issues.

Noisy Pump

Diagnosing and fixing issues causing the pump to operate noisily, like air leaks or bearing wear.

CHAPTER Eight: Technical Data

Pump Performance Table

A table detailing pump specifications, performance ratings, and model information.

CHAPTER Nine: Warranty

Limited Warranty

Details the manufacturer's warranty terms and conditions for pumps and filters.

CHAPTER Ten: Pump structure & parts

Pump Parts List

An itemized list of pump components with part numbers and quantities.

Ningbo FPP-72743 Specifications

General IconGeneral
BrandNingbo
ModelFPP-72743
CategoryWater Pump
LanguageEnglish