Ninja BL780C User Manual

www.ninjakitchen.com
12
English
WARNING: Never leave the appliance unattended
while in use.
IMPORTANT: Make sure that the motor base is
plugged in for use.
1 Place the motor base on a clean, dry, level surface
such as a counter or table top.
2 Add ingredients to the Nutri Ninja
™
cup.
3 Place the Nutri Ninja
™
blade onto the cup and screw it
tightly until you have a good seal. (Fig. 1)
4 Turn the Nutri Ninja
™
cup upside down and place it
onto the motor base, aligning the tabs on the cup with
the motor base. Turn the Nutri Ninja
™
cup clockwise.
(Fig. 2) Turn the power button on, the Nutri Ninja
™
button will illuminate.
5 Press down on the Nutri Ninja
™
button in short intervals
to activate. (Fig. 3)
Assembly and Use for the Nutri Ninja
™
Cup
6 Once you have reached your desired consistency, turn
the power button off. Turn the Nutri Ninja
™
cup counter
clockwise and pull straight up to remove. (Fig. 4, Fig. 5)
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the “Max” fill line.
7 Turn the cup upright and remove the Nutri Ninja
™
blade
by twisting the blade assembly clockwise.
8 Place the To-Go drinking lid onto the Nutri Ninja
™
cup,
twist to seal and enjoy!
9 Make sure that the motor base is unplugged when not
in use.
NOTE: To order additional Nutri Ninja
™
Cups, please
visit our website: www.ninjakitchen.com or feel free to
contact customer service: 1-877-646-5288.
Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5
ASSEMBLY USE REMOVAL
For best results, use short “PULSES”... Practice makes perfect!!

Ninja BL780C Specifications

General

Brand	Ninja
Model	BL780C
Category	Blender
Language	English