3Questions? 1-877-646-5288For how-to videos and more, visit ninjakitchen.com2
HERE’S WHAT’S IN THE BOX
BEFORE YOUR FIRST BREW
PRIMING GROUNDS PRIMING CAPSULES
OR
NOTE: We recommend using cool or room-temperature water in the reservoir.
DO NOT fill with hot or boiling water.
1 Clean all accessories before your first brew.
2 Plug the brewer in and turn it on by pressing the power button.
3 Lift the water reservoir o its base and remove the reservoir lid. Add water up to, but not
exceeding, the Full line. Return the water reservoir to the brewer. DO NOT fill the water
reservoir with anything other than water, as other liquids may damage your brewer.
SCAN HERE
TO ACCESS OWNER'S GUIDE,
HOW-TO VIDEOS, AND MORE
60 OZ.
GLASS CARAFE
FROTHER WHISK
Included in the box. Must be
assembled on the brewer.
NINJA
SMART SCOOP™
Use this to measure
coee grounds.
BREW BASKET
Comes fully installed
in the brewer. It must
always be inserted when
brewing grounds.
PAPER FILTER KIT
60 OZ. REMOVABLE
WATER RESERVOIR
CAPSULE BIN
GROUND COFFEE CAPSULES
ADJUSTABLE
CUP TRAY
CUP TRAY BASE
1 Ensure the lever is closed.
Do not insert a capsule.
2 Center a vessel under the spout.
Press the Capsule Button or turn
the dial to select Lungo.
3 To start, press START BREW.
When the cycle is complete,
discard the water in the vessel,
then rinse. Repeat this process
3 times. You are now ready to
brew capsules.
1 Ensure the brew basket is fully
installed in the unit and close the lid.
Do not add coee.
2 Place the carafe below the brew
basket. Press the Grounds Button to
select Classic, then turn the dial to
select the Full Carafe size.
3 To start, press START BREW. When
the cycle is complete, discard the
water and rinse the carafe. You are
now ready to brew grounds.
To Next Page
Loading...
Need help?
General
