TIP: To learn more about
the unit’s programs, refer
to page 9.
TIP: Use the lid cap to
easily add oil to emulsify
dressings. Add desired
measurement of oil to the
cap, then pour into the
pitcher through the hole in
the lid. Replace cap when
finished.
USING YOUR 72 OZ. PITCHER
IMPORTANT: Review all
warnings on pages 3–6
before proceeding.
IMPORTANT: Hot
ingredients are meant only
for blending in the pitcher,
NOT in the cup.
1 Plug in motor base and place on a clean, dry, level surface
such as a countertop or table. Press downward on the
motor base to adhere the suction cups to the work surface.
Ensure the motor base is connected to power.
2 Lower the pitcher onto the motor base. The pitcher can
be installed in two different orientations. The handle can
be aligned on either the right side or the front of the motor
base. The pitcher should be oriented so the LOCK symbols
are visible on the motor base. Then rotate the pitcher
clockwise until it clicks into place.
To Next Page
Loading...
