7 To remove the pitcher from
the motor base, turn the
pitcher counterclockwise
and then lift it off the motor
base.
8 To remove the lid, pull up
one of the side tabs, then
lift off the lid. The pitcher
can then be emptied.
If hot ingredients were
blended, place the pitcher
on a flat surface, carefully
hold the pitcher handle,
and remove the lid.
Exercise caution when
pouring ingredients to
prevent possible burns.
For units that include the
Double-Walled To-Go
Tumbler, pour your finished
blended drink into the cup
and twist the Spout Lid
onto the cup to take your
drink on the go.
9 When finished, unplug
the unit and release the
motor base from the
work surface. To release
the motor base, place
your hands underneath it
and gently pull it toward
you. Refer to page 19 for
storing instructions.
To Next Page
Loading...
Need help?
General
