7 To remove the cup from the
motor base, turn the cup
counterclockwise and then
lift it off the motor base.
8
Remove the Pro Extractor
Blades
®
Assembly by
twisting it counter-
clockwise. Exercise care
when handling the blade
assembly, as the blades
are sharp. DO NOT store
blended contents with
the Pro Extractor Blades
Assembly attached.
9 To enjoy your drink on the
go, place the Spout Lid
onto the Single-Serve Cup
and twist clockwise until
firmly sealed. For storage
in the cup, use only Spout
Lid to cover.
10 Unplug the appliance
when finished and release
the motor base from the
work surface. To release
the motor base, place
your hands underneath it
and gently pull it toward
you. Refer to page 19 for
storing instructions.
To Next Page
Loading...
Need help?
General
