Ninja Master Prep Professional QB1004NZ 30 User Manual

10
Using the Master Prep
™
Professional Bowl
Shaft
CAUTION: Blades are sharp! Use
extreme caution when handling the
blades. Always hold them by the shaft.
IMPORTANT: Never run the appliance
empty.
1 Place the Master Prep
™
Professional
bowl on a clean, dry, level surface.
2 Holding the lower blade by the shaft,
place it over the spindle pin inside the
Master Prep
™
Professional bowl. (fig. 1)
3 Carefully insert the upper blade over
the lower blade rotating it until it locks
onto the lower blade. (fig. 2)
IMPORTANT: Always assemble the
blades inside the container.
WARNING: DO NOT try to place the
blades onto the power head and then
into the Master Prep
™
Professional b o w l .
4 Place the food that you want to process
into the Master Prep
™
Professional b o w l .
IMPORTANT: Never add ingredients
into the Master Prep
™
Professional bowl
before placing the blade assembly in
first.
NOTE: DO NOT add more than 2 cups
dry or 1 cup liquid ingredients as this
will strain the motor and may cause
overflow.
2
1
QB1004NZ_30_IB_120626_2.indd 9 12-06-26 12:59 PM

Ninja Master Prep Professional QB1004NZ 30 Specifications

General

Power	450 watts
Speeds	2
Functions	Chopping, blending
Dishwasher Safe Parts	Yes
Included Accessories	48 oz pitcher, 16 oz bowl, blades
Number of Blades	2
Material	Plastic
Capacity	48 oz