8
Using the Ninja
®
Express Chop
™
TOLL FREE: 1-800-798-7398
CAUTION: Blades are sharp! Use
extreme caution when handling the
blades. Always hold them by the shaft.
IMPORTANT: Never run the appliance
empty.
1 Place the processor bowl on a clean,
dry, level surface.
2 Holding the chopping blade by the
shaft, carefully place it over the spindle
pin inside the processing bowl. (Fig. 1)
IMPORTANT: Always assemble the
blades inside the container.
WARNING: DO NOT try to place the
blades onto the power head and then
into the Ninja
®
Express Chop
™
.
3 Carefully spin the blade counter
clockwise to make sure that it has
inserted properly. (Fig. 2)
4 Place the food ingredients into the
bowl.
IMPORTANT: Never add ingredients
into the processing bowl before placing
the blade assembly in first.
CAUTION: DO NOT add more than 2
cups dry or 1 cup liquid ingredients as
this may cause overflow.
5 Place the splash guard / storage lid on
the bowl. (Fig. 3)
CAUTION: DO NOT operate without
the splash guard in place.
6 Open the flap on the splash guard.
(Fig. 3)
Shaft
Fig. 1
Fig. 2
Fig. 3
Open Flap
To Next Page
Loading...
Need help?
General
