Nirvana E60 - 9.2 FRONT PANEL DESCRIPTION (C-SERIES)

18
9.2 FRONTPANELDESCRIPTION(C‐SERIES)

1 Displaysthecurrenttemperatureofthewater.
2 Button'SET'whichisusedtomovethroughmenus
3 Button‘INCREASE’whichisusedtoincreasethetemperatureofwater
4 Button`DECREASE'whichisusedtodecreasethetemperatureofwater
5 TheyellowlightmeansweareinthePOOLmode
6
7
MeansweareinHEATINGmode
Meansthecompressorisrunning

WARNING

Thepumpwillgoonandthenthecurrentwatertemperaturewillbedisplayed.
Thecurrenttemperaturedisplayediskeptinmemoryanddisplayedfor5minutesuntilthewatertemperaturesensor
hassampledthecirculatingwater.After5minutes,thewatertemperatureisautomaticallyupdatedanddisplayed.
ADJUSTINGDESIREDTEMPERATURE(B,C&E‐SERIES)

Settings:

Pool OFF,61°Fà95°F OFF,16°Cà35°C
SPAoption OFF,61°Fà104°F OFF,16°Cà40°C

ThecontrolisshippedsettoOFFinPOOLandSPAmode.(option)
Theheatpumpstopsautomaticallyifasettingbelow61°F/16°Cisselected.
InOFFmode,thecontrolwilldisplaythewatertemperature.
UsetheSETkeytoselectPOOLorSPAmode.

Usethe↑keytoincreasethedesiredsettingtoabove61°F/16°C.
Theheatpumpcompressoroperatesautomaticallyifasettingabove61°F/16°Cisselected.

Adjustthesettingstothedesiredvalue.
