[ Edit: 2016/ 11/ 24 Model: E12-A ]
4-22 Monitor, Heater and air conditioner, and audio system
Radio operation
GUID-38488B25-820B-4933-B6E4-F8CAFEA8C0B2
FM·AM button:
GUID-11F97BB9-9503-47D0-8BB9-62C812293875
Push the button to change the band as follows:
AM ? FM1 ? FM2? AM
TUNE (Tuning):
GUID-11F97BB9-9503-47D0-8BB9-62C812293875
Turn the radio TUNE FOLDER knob for manual tuning.
Radio Data System (RDS):
GUID-11F97BB9-9503-47D0-8BB9-62C812293875
RDS stands for Radio Data System, and is a data
information service transmitted by some radio stations
on the FM band (not AM band) encoded within a
regular radio broadcast. Currently, most RDS stations
are in large cities, but many stations are now
considering broadcasting RDS data.
RDS can display
. Station name, such as “The Groove”.
. Music or programming type such as “Classical”,
“Country” or “Rock”.
SEEK TRACK buttons:
GUID-11F97BB9-9503-47D0-8BB9-62C812293875
Push the or button to tune from low to high
or high to low frequencies and to stop at the next
broadcasting station.
SCAN buttons:
GUID-11F97BB9-9503-47D0-8BB9-62C812293875
Push the button to tune from low to high
frequencies and stop at each broadcasting station
for 5 seconds. Pushing the button again during this 5
seconds period will stop SCAN tuning and the radio
will remain tuned to that station.
If the
button is not pushed within 5 seconds,
SCAN tuning moves to the next station.
to Radio memory buttons:
GUID-11F97BB9-9503-47D0-8BB9-62C812293875
Up to 12 stations can be set for the FM band (6 each
for FM1 and FM2) and 6 stations can be set for the AM
band.
1. Choose the radio band using the
button.
2. Tune to the desired station using the
button or the TUNE FOLDER knob.
3. Push and hold the desired station preset button
to until a beep sounds.
4. The station indicator will then come on and the
sound will resume. The station is now set to the
button memory.
5. Other buttons can be set in the same manner.
If the battery cable is disconnected, or if the fuse
opens, the station memory will be erased. In that case,
reset the desired stations.
CD player operation
GUID-12902449-3B1A-4AE6-99CF-A36D49DCDE05
Place the ignition switch in the “ON” or “ACC”
position, and insert the compact disc (CD) into the
slot with the label side facing up. The CD will be
guided automatically into the slot and start playing.
After loading the CD, the number of tracks on the CD
and the play time will appear on the display.
If the radio is already operating, it will automatically turn
off and the CD will play.
If the system was turned off while the CD was playing,
pushing the Power button will start the CD.
button:
GUID-11F97BB9-9503-47D0-8BB9-62C812293875
When the button is pushed with the system off
and the CD loaded, the system will turn on and the CD
will start to play.
When the
button is pushed with the CD loaded
and the radio playing, the radio will automatically be
turned off and the CD will start to play.
SEEK TRACK (rewind/forward)
buttons:
GUID-11F97BB9-9503-47D0-8BB9-62C812293875
When the or button is pushed and held while
the CD is being played, the CD will play while fast
forwarding or rewinding. When the button is released,
the CD will return to normal play speed.
When the
or button is pushed for less than
1.5 seconds while the CD is being played, the next
track or the beginning of the current track on the CD
will be played.
RPT (REPEAT) button:
GUID-11F97BB9-9503-47D0-8BB9-62C812293875
When the button is pushed while the CD is
played, the play pattern can be changed as follows:
(CD)
(Normal) Û 1 Track Repeat
(CD with compressed audio files)
(Normal) ? 1 Folder Repeat ? 1 Track Repeat ?
(Normal)
RDM (RANDOM) button:
GUID-11F97BB9-9503-47D0-8BB9-62C812293875
When the button is pushed while a CD is being
played, the play pattern can be changed as follows:
(CD)
(Normal) Û 1 Disc Random
(CD with compressed audio files)
(Normal) ? 1 Disc Random ? 1 Folder Random ?
(Normal)
Condition:
To Next Page
Loading...