Nissan NOTE - Page 132

Heater operation
Heating:
This mode is used to direct heated air to the foot
outlets.
1. Move the air intake lever to the “
” position
for normal heating.
2. Turn the air flow control dial to the “
” posi-
tion.
3. Turn the fan speed control “
” dial to the
desired position.
4. Turn the temperature control dial to the desired
position between the middle and the hot (right)
position.
Ventilation:
This mode directs outside air to the side and centre
vents.
1. Move the air intake lever to the “
” position.
2. Turn the air flow control dial to the “ ” posi-
tion.
3. Turn the fan speed control “
” dial to the
desired position.
4. Turn the temperature control dial to the desired
position.
Defrosting or defogging:
This mode directs the air to the defogger outlets to
defrost/defog the windows.
1. Move the air intake lever to the “
” position.
2. Turn the air flow control dial to the “
” posi-
tion.
•
When the front defogger “ ” is selected, the
air conditioner will automatically turn on when
the outside air temperature is above –2°C (28°F)
to defog the windscreen.
3. Turn the fan speed control “
” dial to the
desired position.
4. Turn the temperature control dial to the desired
position between the middle and the hot (right)
position.
5. Turn the side vents to the side windows to de-
frost or defog for a clear view to the side mirrors.
•
To remove frost from the outside surface of the
windscreen quickly, turn the temperature control
dial to the maximum hot position and the fan
speed control “
” dial to the maximum posi-
tion.
Bi-level heating:
This mode directs cool air from the side and centre
vents and warm air from the foot outlets. When the
temperature control dial is turned to the maximum
hot or cool position, the air between the vents and
the foot outlets is the same temperature.
1. Move the air intake lever to the “
” position.
2. Turn the air flow control dial to the “
” posi-
tion.
3. Turn the fan speed control “
” dial to the
desired position.
4. Turn the temperature control dial to the desired
position.
Heating and defogging:
This mode heats the interior and defogs the win-
dows.
1. Move the air intake lever to the “
” position.
2. Turn the air flow control dial to the “ ” posi-
tion.
3. Turn the fan speed control “
” dial to the
desired position.
4. Turn the temperature control dial to the maximum
hot (right) position.
5. Turn the side vents to the side windows to de-
frost or defog for a clear view to the side mirrors.
Air conditioner operation
The air conditioner system should be operated for
approximately 10 minutes at least once a month.
This helps prevent damage to the air conditioner
system due to the lack of lubrication.
Cooling:
This mode is used to cool and dehumidify the air.
1. Move the air intake lever to the “
” position.
2. Turn the air flow control dial to the “
” posi-
tion.
3. Turn the fan speed control “
” dial to the
desired position.
4-16 Heater and air conditioner, and audio system