EasyManua.ls Logo

Nissan NOTE - Page 185

Nissan NOTE
290 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Quickly push and release the SET− switch. This
will reduce the vehicle speed by about 1 km/h or
1 MPH.
Resetting to faster speed:
Use any one of the following methods to reset to a
faster speed.
Depress the accelerator pedal. When the ve-
hicle reaches the desired speed, push and re-
lease the SET− switch.
Push and hold the RES+ switch. When the ve-
hicle reaches the desired speed, release the
RES+ switch.
Quickly push and release the RES+ switch. This
will increase the vehicle speed by about 1 km/h
or 1 MPH.
Resuming at preset speed:
Push and release the RES+ switch.
The vehicle will resume the last set cruising speed
when the vehicle speed is over 40 km/h (25 MPH).
Cancelling cruising speed
Use any one of the following methods to cancel the
set speed.
Push the CANCEL switch. The SET indicator
light will turn off.
Tap the footbrake pedal. The SET indicator light
will turn off.
Push the cruise control MAIN switch. Both the
SET and cruise indicator lights turn off.
The speed limiter allows you to set the desired ve-
hicle speed limit. While the speed limiter is acti-
vated, the driver can perform normal braking and
acceleration, but the vehicle will not exceed the set
speed.
WARNING
Always observe posted speed limits. Do not
set the speed over them.
Always confirm the setting status of the speed
limiter on the vehicle information display and
instrument panel.
When the speed limiter is on, the cruise control can-
not be operated.
SPEED LIMITER OPERATIONS
The speed limiter can be set between 30 km/h and
210 km/h or 20 MPH and 130 MPH.
The speed limiter set switches are located on the
steering wheel.
A.
RES/+ switch
B.
SET/− switch
1.
CANCEL switch
2.
Cruise control MAIN switch (For details, see
“Cruise control (where fitted)” earlier in this
section.)
3.
Speed limiter MAIN switch
(When this switch is pushed, the speed limiter
enters the standby mode. If the cruise control
system is on, the system will turn off and the
speed limiter enters the standby mode.)
Speed limiter display and indicators
The speed limiter operating condition is shown on
the vehicle information display and instrument panel.
NIC2046
NSD446
SPEED LIMITER (where fitted)
Starting and driving 5-23

Related product manuals