XTRONIC TRANSMISSION (CVT)
POSITION INDICATOR (where fitted)
The Xtronic Transmission (CVT) position indicator
jA indicates the shift lever position when the igni-
tion switch is in the ON position.
For more information, see “Driving vehicle” later in
this section.
BRIGHTNESS CONTROL
The instrument brightness control operates when
the ignition switch is in the ON position.
Turn the brightness (/trip odometer) control switch
jA clockwise or anticlockwise to increase or de-
crease the brightness. The brightness indicator
jB
will be shown briefly in the display when the bright-
ness control switch is turned.
When the brightness level reaches the maximum or
minimum, a beep will sound.
OUTSIDE AIR TEMPERATURE
(where fitted)
The outside air temperature is displayed in °C.
When the outside air temperature decreases to
4 °C (39 °F) or lower, the outside air temperature
display blinks to give a warning. The ICY warning
icon
ja appears.
The display will stop blinking after 1 minute or when
the outside air temperature increases over 4°C
(39°F) or decreases below - 4°C (25° F).
MAINTENANCE INFORMATION petrol
models
When the ignition switch is placed in the ON posi-
tion, maintenance information (the wrench symbol
and the remaining distance to oil change (or
maintenance)) is displayed for about 5 seconds and
then turns off.
JVI0471XZ
JVI0473XZ
NIC2015
Instruments and controls 2-5
To Next Page
Loading...