EasyManuals Logo

Nissan Security+Plus User Manual

Nissan Security+Plus
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
H
OW DOES MY VSC PROTECT ME?
In return for your payment, Nissan Extended Services North America (NESNA)* will arrange for a Nissan dealer to repair or replace
all covered parts of your vehicle (see Section 4 below) when such repair or replacement is due to a “MECHANICAL
B
REAKDOWN”, as defined below, and when all other terms and conditions of this VSC are met. The deductible which you must
pay is listed in the Vehicle/Agreement Information section of this VSC.
MECHANICAL BREAKDOWN means the inability of a covered part(s) to perform the function(s) for which it was designed, due
s
olely to defects in Nissan materials or faulty workmanship for which Nissan is responsible. MECHANICAL BREAKDOWN does
not include damage due to negligence, damage caused by an accident, or the gradual reduction in operating performance due to
wear and tear. In addition, this VSC does not provide any benefit for any mechanical failure or breakdown caused by a non-
covered part.
*NESNA indicates Nissan Extended Services North America, P. O. Box 685004, Franklin, TN 37068-5004, Tel. 615-725-1000.
2 WHAT ARE MY VSC TERMS?
T
his VSC applies during the term shown in the Vehicle/Agreement Information section of this VSC.
3 WHEN DOES MY COVERAGE BEGIN AND END?
N
ew Vehicle VSCs: Coverage begins on the manufacturer's original warranty start date, with mileage beginning at zero,
regardless of the vehicle age or odometer reading at the time of sale, ALTHOUGH ANY OR ALL COMPONENTS OR PARTS
MAY BE COVERED BY THE MANUFACTURER'S LIMITED WARRANTY, WARRANTY EXTENSIONS, RECALLS OR
CAMPAIGNS.
Pre-Owned Vehicle VSCs: The contract term begins on the date of purchase and current odometer reading at the time of
purchase, ALTHOUGH ANY OR ALL COMPONENTS OR PARTS MAY BE COVERED BY THE MANUFACTURER'S LIMITED
WARRANTY, WARRANTY EXTENSIONS, RECALLS OR CAMPAIGNS. The months and miles of the pre-owned contract term
purchased are additive to the date and miles on the odometer at the time of purchase. The VSC continues until the expiration
date or expiration mileage listed in the Vehicle/Agreement Information Section of the VSC is reached, whichever occurs first.
Odometer reading, which appears in the Vehicle/Agreement Information section of this VSC, means the actual number of miles
which the vehicle has been operated since manufacture as indicated on the vehicle’s odometer, unless the odometer is/has
been broken, has been replaced or has been tampered with. In such a situation, NESNA will calculate the total actual
number of miles of vehicle operation since manufacture based on the information available. If ever the odometer is tampered with,
and/or is inoperative so that the vehicle’s total actual number of miles of operation since manufacture cannot be accurately
determined by NESNA, this VSC will be void.
4 WHAT DOES MY VSC COVER?
This VSC covers repairs needed due to MECHANICAL BREAKDOWN, as defined above, for Nissan components in the following
categories:
ENGINE:
Cylinder block, head(s) and all internal parts, timing gears, tensioner(s), timing chain or belt and cover(s), harmonic balancer
(crankshaft pulley), manifolds and collector(s), oil pump, valve cover(s), oil pan, drive plate, flywheel ring gear and engine mounts,
turbocharger housing and internal parts, turbocharger valves and actuator, radiator, fan and fan coupling, fan motor, water pump,
and seals and gaskets.
TRANSMISSION:
Transmission case(s) and all internal parts including the torque converter, vacuum modulator, electric control units, oil pan,
transmission mounts, transfer case and all internal parts, and seals and gaskets.
FRONT WHEEL DRIVE:
Final drive housing and all internal parts, constant velocity joints (slide joint spider assemblies), and seals and gaskets. Note:
constant velocity boots are excluded from coverage.
FUEL:
Fuel pump(s), electro injection unit, electronic fuel injection sensors, control units, injectors, fuel tank and lines, and seals and
gaskets.
REAR WHEEL DRIVE AND FOUR WHEEL DRIVE:
Rear drive axle housing and all internal parts, propeller shaft(s), universal joints (journal assemblies), axle shafts, axle bearings
and retainers, free running hubs, constant velocity joints (spider assemblies), and seals and gaskets. Note: constant velocity
boots are excluded from coverage.
SUSPENSION:
Strut assemblies except inserts, upper and lower control arms (links/transverse links) and bushings, tension/compression rods
and bushings, stabilizer bars and bushings, connecting rods and bushings, rear arm assembly, torsion bars, upper and lower
ball joints, wheel bearings and seals, knuckle spindle, hubs, king pins and bearings, front coil and leaf springs.
STEERING:
Steering gear housing(s) and all internal parts, rack and pinion assembly, power steering pump, steering column main and upper
shafts, steering linkages and couplings, HICAS power cylinder assembly and all internal parts, and seals and gaskets.
ELECTRICAL:
Starter motor and solenoid, alternator, voltage regulator, ignition coil, distributor, ignition switch and module, transistor ignition
unit, electronic spark control detonation sensor and controller, wiring harness, horn and windshield wiper motor.
BRAKES:
Master cylinder, vacuum assist booster, wheel cylinders, disc calipers, hydraulic valves, lines and fittings, and seals and gaskets.
NISSAN AIR CONDITIONING (ORIGINAL EQUIPMENT MANUFACTURER ONLY):
Compressor, clutch and pulley, condenser, evaporator, receiver dryer, and seals and valves.
NOTE:
Only those parts listed are covered under this VSC.
1
RA0412-022012
N
ISSAN VEHICLE SERVICE CONTRACT (VSC)
POWERTRAIN PREFERRED

Other manuals for Nissan Security+Plus

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nissan Security+Plus and is the answer not in the manual?

Nissan Security+Plus Specifications

General IconGeneral
BrandNissan
ModelSecurity+Plus
CategoryAutomobile Accessories
LanguageEnglish

Related product manuals