Nissan Urvan - Page 61

Black plate (62,1)
[ Edit: 2012/ 4/ 9 Model: E26-A ]
2-26 Instruments and controls
*
A
: Knob
*
B
: Washer
*
C
: Pipe
NOTE:
. Always install the partition pipe in the
location that is furthest forward in the
luggage room.
. When installing the partition pipe, make
sure that the washer is mounted between
the pipe and knob.
Removal of the partition pipe
GUID-422406D4-5B27-43FF-84F5-29824431B791
JVI0439X
*
A
: For front seat
*
B
: For rear seat
Turn the knob
*
1
to loosen it and pull it inside the pipe
*
2
to remove it.
Installation of the partition pipe:
GUID-896AA31A-81D 0-4E9B-81ED-1F58D53AA854
To install the partition pipe, perform the procedure for
removal in reverse.
NOTE:
. For the front seat, install the partition pipe
so that it is in front of the installation
location.
. There are two locations in which to install
the partition pipe, on the front and rear of
the rear seat. Change the location of the
partition pipe depending on how you are
using the luggage room.
GUID-63672767-DC55-40BD-B4FD-0374BD9991EF
SIC2872
1. To block out glare from the front, swing down the
sun visor
*
1
.
2. To block glare from the side, remove the sun visor
from the center mount and swing it to the side
*
2
.
SUN VISORS