Be sure to read these Safety Instructions.
Keep the Instructions for future reference.
Be sure to HEED
all Warnings.
Follow ALL
instructions.
DO NOT
use this device or any of the equipment described, near water.
Clean this device ONLY
with a dry cloth.
DO NOT
block any ventilation openings.
Install in accordance with the manufacturer’s instructions.
DO NOT
install near any heat sources such as radiators, heat registers, stoves or other apparatus
(including amplifiers) that produce heat.
DO NOT
defeat the safety purposes of polarized or grounding type plugs. A polarized plug has
two blades, with one blade wider than the other. A grounding plug has two blades and has a third
grounding prong. The wide blade and the grounding prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete
outlet.
Protect the power cord from being walked on or pinched especially at plugs, convenience
receptacles and other points where they exit from the device.
Only use attachments and/or accessories specified by the manufacturer.
Refer all servicing to qualified service personnel. Servicing is required when the device has been
damaged in any way, such as the power supply cord or plug is damaged, liquid has been spilled
on, or objects have fallen into the device, the device has been exposed to rain or moisture, does
not operate normally or has been dropped.
WARNING: To reduce risk of fire or electric shock, do not expose this apparatus to rain or
moisture.
Installation shall be performed ONLY
by qualified personnel and must conform to all local codes.
Unless the device is specifically marked as a NEMA 3, 3R, 3S, 4, 4X, 6 or 6P enclosure, it is
designed for indoor use ONLY
and it must not be installed where exposed to rain or moisture.
Important Safety Instructions
To Next Page
Loading...