Troubleshooting
PROBLEM POSSIBLE CAUSE
No video/data Check camera and ER8500C/ET1500C device connections.
Check coax cable condition and BNC connectors.
Check that the camera is powered.
Check that supplied camera power meets manufacturer’s
specifications.
Check cable that cable distances do not exceed PoE
capabilities. Refer to chart on pg# 7.
Check that coax cable length does not exceed ER8500C’s
operating distances.
Check link & device status. See chart on pg# 7.
Video/data loss Check network switch terminations & link status.
Check network routing table(s).
Confer with site Network Administrator
For Tech Support Call 1-(800)528-4343
Technical Specifications
Receiver Unit
Network Output Port 1x RJ45 Connector @ 1 Gigabit
Link Port 8x BNC Coax Jacks
Ethernet 100BASE-TX Full Duplex
Ethernet Connection [1] Auto Configuring 10 ⁄ 100 RJ45 port
LED Connectivity Indicators Link Status, Power, PoE Out, 10Mb or 100mb
Device Dimensions 1 RU x 12.0"D
Mounting Standard rack mounting design
Operating Temperature 0° to 37° C / 32° to 98.6° F
Humidity Up to 85% non-condensing
Power Requirements IEC380 power connector - 115 VAC @ 60HZ
Total Power Output 640 Watts
PoE Capabilities IEEE 802.3af & IEEE 802.3at compliance per port
Max Operating Distance 1,640ft/500m
Shipping Weight 10 lbs
To Next Page
Loading...