EasyManua.ls Logo

NiteRider PRO 1800 Race User Manual

NiteRider PRO 1800 Race
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
150-22842 - Rev A
Pro 1800 Race
User Guide
BATTERY CHARGING
1. Plug the AC Power Adapter into an electric outlet,
then plug the cable from the AC Power Adapter into
the Battery.
2. The indicator light will be red until the battery is
fully charged; then it changes to blue.
3. Unplug the AC Adapter from the Battery by grasping
the connectors rather than the cable.
4. Leaving the Battery and AC Adapter connected
indenitely will not harm the batteries.
5. When storing for an extended period of time, charge
battery every three months to maximize battery life.
RIDING AT NIGHT
While a Pro 1800 Race lighting system will improve
your view, control and enjoyment of night riding,
please remember that cycling at night is an inherently
dangerous activity. In addition to using your lighting
system properly and riding with extreme caution,
NiteRider urges you to:
Never ride alone.
• Always let someone know where you are going.
• Wear a helmet and reective clothing.
• Carry an auxiliary light and emergency supplies.
• Make sure the headlamp, mounting bracket and
battery are securely fastened.
• Always disconnect the battery from the
headlamp when transporting the light system.
PROTECTING YOUR INVESTMENT
Properly charge your battery to maximize its lifespan (see the
“Battery Charging and Care” section for detailed information).
The Pro 1800 Race will perform in wet weather conditions, but
submerging it in water will damage the system.
SUPPORT
If you experience diculties during product installation or
operation, NiteRider provides free telephone support on
weekdays from 8:00 AM to 4:30 PM (Pacic Time)
at 800.466.8366, ext 4. You may also e-mail us at
support@niterider.com.
WARRANTY
NiteRider stands behind its products with the following
warranties:
Lifetime warranty on all mechanical components
2 years on electrical components
180 days on rechargeable batteries
To obtain warranty service, it is preferable to have your
original sales receipt. Contact the NiteRider customer
service department at 800.466.8366, ext 4 to obtain a Return
Merchandise Authorization (RMA) number. The RMA number
must be prominently displayed on the outside of your package.
The product must be properly packaged to prevent damage
in transit. For complete warranty information, please visit our
website at www.niterider.com.
RUN TIMES
The Pro 1800 Race will run up to:
Light Level
High
Med
Low
Walk
Time*
1:30
3:00
6:00
25:00
Lumens
1800
700
400
80
*Run Times are approximations and will vary.
NiteRider Technical Lighting Systems, Inc.
8295 Aero Place, Suite 200
San Diego, CA 92123
www.niterider.com
Fuel Gauge
The 8-step, LED fuel gauge is located on
top of the headlamp in front of the power
button. When all four LED’s are lit solid
green, the battery is fully charged. As
the battery discharges ⅛ increments of
capacity, the LED’s from right to left, successively go from solid
to blinking green, to out.
With only the nal ⅛ capacity remaining one LED blinks red. At
this time, the headlamp should be turned o and the battery
recharged.
Question and Answer IconNeed help?

Do you have a question about the NiteRider PRO 1800 Race and is the answer not in the manual?

NiteRider PRO 1800 Race Specifications

General IconGeneral
BrandNiteRider
ModelPRO 1800 Race
CategoryBicycle Accessories
LanguageEnglish

Summary

Battery Charging and Fuel Gauge

Fuel Gauge

Describes the 8-step LED fuel gauge located on top of the headlamp for battery status indication.

Battery Charging

Provides instructions for charging the battery using the AC adapter and notes on charging frequency.

Night Riding Safety

Riding at Night

Offers safety recommendations for night riding, emphasizing caution and preparation.

Product Care and Support

Protecting Your Investment

Advice on battery charging, product use in wet conditions, and avoiding water submersion.

Support

Provides contact information for telephone and email support for product installation or operation.

Warranty Information

Details NiteRider's warranties on mechanical and electrical components, and batteries.

Product Overview and Components

Discover the Night

Introduction to the Pro 1800 Race, highlighting its features and encouraging user familiarization.

Parts List and Identification

Lists and identifies all components included in the Pro 1800 Race system.

Mounting Instructions

Mounting the Headlamp

Instructions for mounting the headlamp using the Universal Handlebar Mount or Helmet Mount.

Mounting the Battery System

Guidance on mounting the battery using frame mounts or placing it in a pocket or pack.

Product Operation

Operation

Step-by-step guide on how to connect, turn on, cycle through modes, and turn off the headlamp.

Related product manuals