24
When operating the terminal in network mode, install Access
Manager Professional and conduct the following test.
① Install the AccessManager Professional in the server PC.
Register the administrator and set initial configurations. (For
more information, see AccessManager Professional User
Manual)
② Select the Network -> Normal -> “Wireline” in Admin menu of
Terminal. (See FingkeyAccess terminal User Manual)
③ Set the network settings in the Terminal Admin menu.
④ Start the AccessManager and then register after check if the
terminal is connected.
⑤ Register a terminal user in the server PC and check that
authentication proceeds properly.
⑥ If there are no problems, delete both the server user and the
terminal user.
To Previous Page
Loading...
