Xbox
®
Series X|S setup
Page 8
After you have setted the wheel and gear shifter as indicated in page 2, connect
the original Xbox
®
Series X|S controller to the wheel with the USB-A to USB-C
Type C cable, provided in the packaging.
Connect the wheel to the console’s USB port and turn the console on.
The wheel’s LED automatically switch on green colour, then press the Home
button on the wheel.
At this point, the wheel is ready. Play the game and customize your in-game
setup, following the “Xbox
®
Series X|S buttons layout” as displayed in page 9.
(1)
(2)
(3)
(4)
Note:
Note:
In case you lose the USB-A
to USB Micro B cable, you
can replace it with any
similar cable available in the
market, paying attention that
it has DATA function.
You must connect the original
Xbox®Series X|S controller to the wheel.
Third party’s controllers, not officially
licensed by Xbox®, are not going to work.
To Next Page