6.How to charge
Before charging, turn off the scooter. The scooter is equipped with a powerful charger. Charging from
0%-100% takes 3 to 4 hours. Always charge the scooter to 100% if possible. Make sure to charge it to
100% the first three times. For more information, see the Charging section above.
Find the location of the charging port
Open the charging port rubber plug
Plug in the charging plug
After charging, make sure the charging port is covered with the rubber plug.
Warning:
• Make sure that the e-scooter, the charger, and the charging port of the scooter are dry.
• When your scooter is fully charged, the LED light on the charger will change from red (charging) to green
(turbulent charging).
• Use only the original charger. Other chargers damage the device and carry other potential risks.
• The scooter must not be charged over extended periods. Overcharging shortens the battery life.
To Next Page
Loading...
