Nitto MYTON MAGW-40 - User Manual

Due to continuous product development/improvement the specifications and configurations in this
document are subject to change without prior notice.
Manufactured by :
NITTO KOHKI Co., Ltd.
2-9-4, Nakaikegami, Ohta-ku,
Tokyo, 146-8555, Japan
TEL : (81)-3-3755-1111
FAX : (81)-3-3753-8791
E-mail : overseas@nitto-kohki.co.jp
URL : www.nitto-kohki.co.jp
PNEUMATIC ANGLE GRINDER
Please read this manual carefully before you attempt to use
your tool so that you may use it properly and safely.
MYTON
Model
MAGW-40, MAG-50
PROFESSIONAL TOOL
MAG-50
MAGW-40
Specications
Model MAGW-40 MAG-50
Maximum Operating Pressure MPa 0.6
Air Consumption
(No Load) m
3
/min 0.68 0.87
(Full Load) m
3
/min 0.82 –
Rated Speed (No Load) r/min (min
-1
) 13000 12000
Depressed Center
Grinding Wheel
Diameter mm (inch) 100 (4) 125 (5)
Hole mm (inch) 16 (5/8) 22 (7/8)
Mass (Weight) kg 1.6 2.2
Sound Pressure Level dB (A) 86 84
Sound Power Level dB (A) 97 95
Vibration Level
[Uncertainty K]
Body m/s
2
[m/s
2
] 6.3 [1.10] 4.6 [0.64]
Handle m/s
2
[m/s
2
] – 6.5 [1.20]
Thread Size of Air Inlet Rc3/8
Keep the manual handy – so you can use it whenever necessary.
Original Instructions
MAGW40_MAG50_E.indd 1 13.7.4 3:23:45 PM

Summary

Specifications

IMPORTANT SAFETY INSTRUCTIONS

General Tool Safety for Operators

Safety guidelines for operators regarding clothing, posture, and general operation.

Work Area Safety

Ensuring a safe work environment, including cleanliness and hazard avoidance.

Before Operation Checks

Pre-operation inspection of the tool, parts, and mounting.

Tool Handling and Storage

Safe practices for handling, carrying, and storing the tool.

MAINTENANCE AND DISPOSAL

Tool Maintenance and Parts

Procedures for maintaining the tool, checking parts, and using genuine replacement parts.

Tool Disposal Guidelines

Instructions for environmentally responsible disposal of the tool.

GENERAL PNEUMATIC TOOL SAFETY

Pneumatic Tool Warnings

Critical warnings regarding air pressure, exhaust air, and electrical insulation.

Pneumatic Tool Cautions

Cautions for careful handling and air hose management.

INSTRUCTIONS FOR THIS TOOL

Tool Usage and Warnings

Safety warnings and general information about using the pneumatic angle grinder.

Package Contents Verification

Instructions for checking the included package contents against the list.

AIR SUPPLY AND PREPARATION

Air Supply Requirements

Details on adjusting air pressure, connecting the air line, and lubrication.

MAG-50 Model Preparation

Steps for attaching hoses and setting up the side handle for the MAG-50.

GRINDING WHEELS AND MOUNTING

Grinding Wheel Selection and Safety

Guidelines and warnings for selecting and using grinding wheels with the tool.

Grinding Wheel Mounting and Removal

Procedures for mounting and removing grinding wheels for MAGW-40 and MAG-50 models.

TOOL OPERATION AND ADJUSTMENT

Starting, Stopping, and Adjusting Speed

Instructions on how to start, stop, and adjust the tool's operating speed.

STORAGE, PARTS, AND OPTIONS

Tool Storage and Service Parts Ordering

Guidance on proper tool storage and procedures for ordering service parts.

Optional Parts for MAGW-40

List of optional accessories available for the MAGW-40 model.

EXPLODED DIAGRAM MAGW-40

MAGW-40 Exploded View and Parts List

Detailed diagram and part number list for the MAGW-40 model.

EXPLODED DIAGRAM MAG-50

MAG-50 Exploded View and Parts List

Detailed diagram and part number list for the MAG-50 model.

COMPANY INFORMATION AND COMPLIANCE

Overseas Affiliates and Offices

Contact information for Nitto Kohki's international branches.

EC Declaration of Conformity

Declaration of product compliance with EC directives and standards.

Nitto MYTON MAGW-40 Specifications