Due to continuous product development/improvement the specifications and
configurations in this document are subject to change without prior notice.
Manufactured by :
NITTO KOHKI Co., Ltd.
2-9-4, Nakaikegami, Ohta-ku,
Tokyo, 146-8555, Japan
TEL : (81)-3-3755-1111
FAX : (81)-3-3753-8791
E-mail : overseas@nitto-kohki.co.jp
URL : www.nitto-kohki.co.jp
Specifications
Model MLG-25 MLG-40 MLG-50 MLG-70
Maximum Operating Pressure MPa
0.6
Air Consumption (No Load) m
3
/min 0.42 0.45 0.7 0.7
Maximum Power W 210 710 1,100 1,100
Rated Speed (No Load) r/min(min
-1
) 19,000 13,000 11,000 7,600
Depressed Center
Grinding Wheel
Diameter mm(inch)
58 (2-9/32) 100 (4) 125 (5) 180 (7)
Hole mm(inch)
9.6 (3/8) 16 (5/8) 22 (7/8) 22 (7/8)
Mass (Weight) kg
0.6 1.4 2.5 2.5
Sound Pressure Level dB(A)
90 88 89 89
Sound Power Level dB(A)
95 99 100 100
Vibration Level
[Uncertainty K]
Body m/s
2
[m/s
2
]
≦
2.5
(1.8 [0.83])
6.3 [1.10] 3.6 [0.85] 3.8 [0.87]
Handle m/s
2
[m/s
2
]
−−
4.1 [0.90] 6.2 [1.10]
Thread Size of Air Inlet Rc1/4 Rc3/8 Rc3/8 Rc3/8
PNEUMATIC ANGLE GRINDER
Please read this manual carefully before you attempt to use
your tool so that you may use it properly and safely.
MYTON
Model MLG-25, MLG-40, MLG-50, MLG-70
PROFESSIONAL TOOL
Keep the manual handy – so you can use it whenever necessary.
Original Instructions
MLG-25
MLG-50 MLG-70
MLG-40
To Next Page
Need help?
General
