9Initial startup
4.
DE
GB
FR
NL
PL
RU
4. INITIAL STARTUP
4.1. Preparation
Remove the machine and other supplied parts from the packaging
Place the machine on a level, dry work surface (ventilation slots must not be covered)
Connect the mains supply cable to a power socket which has been correctly installed
(any unnecessary length of cable remains inside the cable compartment)
Switch on the machine
If the machine is switched on after the initial startup, it first heats up. If the automatic switch-
on rinse is enabled, the display shows RINSING SYSTEM and the rinse procedure starts
automatically. If the automatic switch-on rinse is disabled, the display shows PLEASE RINSE
and the rinse procedure must be started.
4.2. Initial Start menu
The instructions on the display lead you through the Initial Start menu conveniently and
step-by-step.
Set language
Select the language and confirm
Set filter
Select the filter setting
NOTE
Details on Operation of the machine are
contained in Chapter 3, starting at page 7.
Filter YES Filter NO
To Next Page
Loading...