7
8
7
You can also display photos and videos from your USB and SD card. To view your SD Card
and USB photos, use the Remote or 4-way Key to navigate the Main Menu and select the
USB & SD Card Menu by pressing OK.
1. To browse your memory card or USB drive, select USB & SD Card Menu from the
Main Menu.
2. Select the storage medium you connected to your Cloud Frame. (SD Card/USB Media)
3. Once you have selected the storage medium, choose the folder your photos are
located in.
4. If there are too many photos or videos, you can narrow the search by choosing Show
Video or Show Pictures.
5. Once you have found the folder your photos are located in, press OK. Now your Cloud
Frame will display the folder’s photos/videos on your Cloud Frame.
Important Note: If the Cloud Frame does not recognize your USB/SD card, please check
whether it is correctly plugged in. The Cloud Frame supports the following formats: File
(FAT/FAT32); Photos (JPG/JPEG); Videos (HD 720p H.264 AAC). For additional support,
please visit our support page on www.nixplay.com.
You can change various settings on your nixplay Cloud Frame so that it suits your needs
better. To change your Cloud Frame settings, select Settings from the Main Menu. When
you enter the Settings menu, you will see a list of settings for you to choose from:
8.1 NETWORK SETTINGS
To connect to another WiFi network:
1. Use the UP/DOWN arrows on the Remote or the 4-Way Key on the back of the Cloud
Frame.
2. Press OK to select your WiFi.
3. Enter your WiFi password (if required) and then select the Connect button
USB/SD CARD
SETTINGS
To Next Page
Loading...
