18 19
How to no!no!
B
Gliding no!no!
Glide no!no! at approximately a 90˚ angle with the Roller flat against your skin
and the logo facing in the direction you are treating. [FIGURE B]
> Glide one way only, in the direction of the logo. Do not go back and forth.
Important Notes about Gliding:
> It is best to glide towards your body against the grain of the hair growth.
However, if it is more comfortable you may glide in other directions, but
always in the direction of the Status Screen.
> Use a STEADY, SMOOTH and EVEN motion. If you move too slowly, the device
will not activate; if you move too fast, you will not achieve optimal results.
> When gliding at the proper speed the blue light will be steady. A blinking
or flickering blue light indicates that you may be moving too slowly. Once
your movement has been adjusted, the blue light will remain steady.
> Do not press down too hard on your skin.
> You may need to go over an area more than once; 4-6 passes may be
enough. If the skin is not uncomfortably warm, you may continue. If there
is still hair left after buffing and your skin is too warm, wait a few minutes
to return to the area. Try to remove all of the hair.
> Buff after each treatment to remove treated hair left behind.
To Next Page
Loading...
