NOCO Genius BOOST+ GB40 User Manual

User Interface.
1. Internal Battery Level
Indicates the charge level of the internal battery.
2. Error LED
Illuminates Red if reverse polarity is detected, or blinks
“On” and “Off” when the internal battery temperature is
too high.
3. Power Button
Push to turn unit “On” & “Off”.
4. Power LED
Illunimates White when unit is “On”.
5. Boost LED
Illuminates White when Boost is active. If the unit is
connected properly to a battery, the GB40 will automatically
detect a battery and go into Boost mode (LED flashes White
when Manual Overide feature is active).
6. Manual Override Button
To enable, push and hold for three (3) seconds.
WARNING: Disables safety protection and manually
forces Boost “On”. Only for use when a battery is too
low to be detected.
7. Light Mode Button
Toggles the ultra-bright LED light through 7 light modes:
100% > 50% > 10% > SOS > Blink > Strobe > Off

NOCO Genius BOOST+ GB40 Specifications

General

USB ports quantity	1
Compatible products	-
Power protection features	Reverse polarity
Polarity reverse circuit protection	Yes
Type	Jump Starter
Input voltage	5 V
Output current	2.1 A
Battery recharge time	12 h
Batteries included	No
Product color	Black, Grey
Storage temperature (T-T)	-20 - 50 °C
Operating temperature (T-T)	-30 - 50 °C
Sustainability certificates	RoHS
Cables included	Micro-USB
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	170 mm
Width	81.2 mm
Height	43.1 mm
Weight	1088 g