To Next PageTo Next Page
Need help?Do you have a question about the NOCO Genius BOOST PRO GB150 and is the answer not in the manual?
General| Product color | Black |
|---|---|
| Output current | 3000 A |
| Battery capacity | 89 Wh |
| Starting current | - A |
| Built-in flashlight | Yes |
| Built-in air compressor | No |
| Micro-USB ports quantity | 1 |
| Diesel engine rating (max) | 7 L |
| Package depth | 429 mm |
| Package width | 233 mm |
| Package height | 102 mm |
| Master (outer) case width | 254 mm |
| Master (outer) case height | 269 mm |
| Master (outer) case length | 462 mm |
| Master (outer) case weight | 7937 g |
| Quantity per master (outer) case | 2 pc(s) |
| Operating temperature (T-T) | -20 - 50 °C |
| DC input voltage | 12 V |
| DC output voltage | 12 |
| USB output current | 2.1 A |
| Cables included | Micro-USB |
Weight and Dimensions| Depth | 68.58 mm |
|---|---|
| Width | 185 mm |
| Height | 315 mm |
| Weight | 2900 g |
Overview of the GB150's features, capabilities, and safety aspects.
Instructions for initial setup and preparation before using the jump starter.
Step-by-step guide on safely connecting the jump starter clamps to a vehicle battery.
Estimated times for recharging the GB150 via USB and 12V.
Explains the automatic power-off feature to conserve energy.
How the built-in voltmeter aids in vehicle battery diagnostics.
How to read the charge level of the GB150's internal battery.
What the red Error LED signifies and potential causes.
How to turn the GB150 unit on and off using the power button.
What the white Power LED indicates when the unit is active.
When the white Boost LED illuminates to show boost activation.
How to enable manual override for low-voltage batteries, with safety warnings.
How to cycle through the different LED flashlight modes.
How to interpret the voltage readings from the GB150's voltmeter.
