Before installing the product, make sure it's fully charged. Visually inspect the product for any signs of damage (e.g., cracks, dents).
Make sure the battery terminals are free from dirt, oxidation, or corrosion. Install the product in any horizontal or vertical orientation,
except with the terminals facing downward. Follow the below steps for the installation process:
1. Remove the original battery following the manufacturer's guidelines.
2. Compare the height of the original battery to the product. If the original battery dimensions are larger than the product, use the
included spacers and foam to adjust the height to match the original battery as closely as possible. For more information on fitment,
see our battery fitment guide.
3. Securely fasten the battery to the battery tray/box, making sure the battery cables reach both battery terminals.
4. Using the included fastening hardware, attach the positive (+) battery cable to the positive (+) battery terminal and the negative (-)
battery cable to the negative (-) battery terminal. Make sure the battery cables connect to the correct polarity.
5. Securely fasten to the battery by using 70-90 inch-pounds of torque. Do not overtighten.
Installation
To Next Page
Loading...
Need help?
General
