Need help?Do you have a question about the NoiseKen INS-4020 and is the answer not in the manual?
Explains symbols for HV voltage, caution, and protective earth.
Crucial rules for pacemakers, explosive areas, grounding.
Instructions for handling missing or damaged warning labels.
Details CE compliance for voltage, installation, pollution.
Info on NMHV connectors and compatibility.
Highlights key capabilities: pulse generation, width, voltage, sync.
Explains internal circuitry and components for pulse generation.
Describes termination resistors' role in square wave pulses.
Lists adjustable parameters and their ranges.
Details all connectors and terminals on the front panel.
Explains buttons, dials, and displays on the front panel.
Describes AC INPUT, PE, EUT LINE INPUT, fan, and serial number.
Essential precautions for placement and connections.
Instructions for powering on/off, EUT supply safety notes.
How to set pulse widths using coaxial cable connections.
How to connect termination resistance for pulse output.
Guides on selecting EUT line (L1, L2, PE) for pulse injection.
Connecting EUT power supply, emphasizing isolation transformer.
Procedures for attaching and removing the outlet panel.
Guidelines for connecting the EUT to the simulator.
How to connect SG terminal for common mode tests.
Pulse generation synchronized with AC frequency and phase control.
Pulse generation independent of AC frequency via pulse period.
Generating single pulses by pressing the 1 SHOT button.
Using external signals or switches for synchronization/control.
Procedures for stopping pulse generation and safety.
Setting parameters for automatic voltage ramping.
Executing the automatic voltage ramp test.
Setting parameters for automatic pulse period ramping.
Executing the automatic pulse period ramp test.
Setting parameters for automatic phase angle ramping.
Executing the automatic phase angle ramp test.
Combining ramp modes for complex tests.
Controlling test start/stop remotely via EXT TRIG.
Saving and recalling current settings.
Explains resistors and applications for voltage correction.
Reminds users to follow safety precautions before testing.
Lists parameters to be considered and evaluated during testing.
Overview of different coupling modes for AC/DC equipment.
Recommended configurations for test tables, ground planes, insulation.
Detailed setup procedures for common and normal mode tests.
Table detailing output voltage, pulse width, repetition modes, power specs.
Identifies consumable components like cables and relays.
Lists necessary equipment for waveform checks.
Recommended settings for the oscilloscope during waveform analysis.
Specifies the unit's settings for performing a waveform check.
Step-by-step guide on verifying output waveform.
Distinguishes relay units for INS-4020/4040.
Procedure for safely replacing the mercury relay unit.
Lists equipment for phase angle correction.
Outlines connection steps and initial settings for correction.
Step-by-step adjustment for accurate phase angle correction.
Procedures to cancel or reset phase angle correction.
Defines terms and conditions for product servicing by the company.
User-level maintenance, cleaning, and safety.
Guidance on reporting symptoms and contacting support.
Warranty applies only to products made by the Company.
Defines warranty duration as one year from delivery.
Lists items and conditions not covered by the warranty.
General| Brand | NoiseKen |
|---|---|
| Model | INS-4020 |
| Category | Recording Equipment |
| Language | English |
To Next Page