NoiseKen INS-4040 - User Manual

INSTRUCTION MANUAL
IMPULSE NOISE SIMULATOR
MODEL INS-4020/4040
NOISE LABORATORY CO., LTD.
Editio n 2 . 0 3
AE B 0 03 1 9- 00E - 1 D

Summary

IMPORTANT SAFETY PRECAUTIONS

BASIC SAFETY PRECAUTIONS

Warning signs and their meanings

Explains the visual warning symbols used throughout the manual.

Basic safety precautions

Outlines fundamental rules for safe operation and usage of the equipment.

Coaxial connectors used for this product

CONTROLS AND DISPLAY FUNCTIONS

Front panel connecters and terminals

Identifies and describes all connectors and terminals on the front panel of the simulator.

Front panel controls and displays

Explains the function of each button, knob, and display on the simulator's front panel.

Rear panel

Details the connectors and features located on the rear panel of the unit.

OPERATION

9.1-9.9 Basic Operations and Connections

Covers initial setup, power, pulse width, connections, and precautions.

9.10-9.14 Operating Modes and Unit Control

OPERATION FOR WIDE APPLICATION

10.1-10.6 Ramp Settings and Test Runs

Explains setting up and executing voltage and variable/phase ramps.

10.7-10.10 Advanced Operation Features

TEST SET-UPS AND ENVIRONMENT

11.1-11.4 General Test Information

11.5 Test Set-up Procedures

Provides detailed examples for various test configurations (common/normal mode, DC/AC).

SPECIFICATIONS

12.1 Specifications

WAVEFORM CHECK

13.1-13.3 Instrument and Settings

13.4 Waveform Checking Procedure

PHASE ANGLE CORRECTION

15.1 Equipment required

15.2 Connections and settings

15.3 Setting up Correcting phase angle

Details the step-by-step process to adjust and correct the phase angle.

NoiseKen INS-4040 Specifications

General

Brand	NoiseKen
Model	INS-4040
Category	Recording Equipment
Language	English