52Copyright © 2005 Nokia. All rights reserved.
1. Select Services > Settings > Conn. settings.
2. Scroll to a set of connection settings that you want to edit.
3. Select Options > Edit.
4. Change the following settings one by one. Make all the appropriate settings.
• Homepage: key in the homepage address of the WAP service you want to
use (press 1 for a dot), and select OK.
• Session mode: select Permanent or Temporary.
• Connection security: select On or Off.
When the connection security is on, the phone tries to use a secure
connection with the WAP service. If a secure connection is not available,
the connection will not be made. If you wish to connect anyway, with a
non-secure connection, set the connection security to Off.
• Data bearer: check that GSM data is selected. For pricing, connection speed
and other information, contact your network operator or service provider.
• Dial-up number: key in the number and select OK.
• IP address: key in the address (press * for a dot) and select OK.
• Authentication type: select Normal or Secure.
• Data call type: select Analogue or ISDN.
• User name: key in the user name (press 1 for a dot) and press OK.
• Password: key in the password and select OK. Repeat this to confirm the
password.
To Next Page
Loading...
