Get started
Install SIM card and battery
Always switch the device off and disconnect the charger
before removing the battery.
The SIM card and its contacts can be easily damaged by
scratches or bending, so be careful when handling,
inserting, or removing the card.
1. Press the release button and remove the back cover (1)
and the battery (2).
2. Insert the SIM card (3).
3. Insert the battery (4) and replace the back cover (5).
Charge the battery
Check the model number of any charger before use with
this device. This device is intended for use when supplied
with power from the AC-3 charger.
The exact charger model number may vary depending on
the type of plug. For example, the model numbers for the
AC-3 charger can be AC-3C, AC-3U, AC-3X, or similar.
© 2007 Nokia. All rights reserved. 13