Nokia 2680 - Writing Text; Text Input Modes and Characters

DRAFT
4. Write text
Text modes
To enter text (for example, when writing messages) you can use traditional or
predictive text input.
When you write text, press and hold Options to toggle between traditional text
input, indicated by
, and predictive text input, indicated by . Not all
languages are supported by predictive text input.
The character cases are indicated by
, , and . To change the character case,
press #. To change from the letter to number mode, indicated by
, press and
hold #, and select Number mode. To change from the number to the letter mode,
press and hold #.
To set the writing language, select OptionsWriting language.
Traditional text input
Press a number key, 2 to 9, repeatedly until the desired character appears. The
available characters depend on the selected writing language.
If the next letter you want is located on the same key as the present one, wait until
the cursor appears and enter the letter.
To access the most common punctuation marks and special characters, repeatedly
press the number key 1 or press * to select a special character.
Predictive text input
Predictive text input is based on a built-in dictionary to which you can also add new
words.
1. Start writing a word, using the keys 2 to 9. Press each key only once for one
letter.
2. To confirm a word, scroll right or add a space.
© 2008 Nokia. All rights reserved. 15