Copyright © 2003 Nokia. All rights reserved.
Basic functions
33
Basic functions
■ Answering or rejecting an incoming call
Press to answer the incoming call and press to end the call.
Press to reject the incoming call.
Press Silence, if available, to mute the ringing tone. Then either answer or reject the call.
Tip: If the Divert if busy function is activated to divert the calls, for example to your voice
mailbox, rejecting an incoming call will also divert the call. See Call divert on page 72.
Call waiting
During a call, press to answer the waiting call. The first call is put on hold. Press to end the
active call. To activate the Call waiting function, see Call waiting on page 73.
■ Options during a call
Many of the options that you can use during a call, are network services.
Press Options during a call for some of the following options:
Mute or Unmute, End call, End all calls, Contacts, Menu and Hold or Unhold, New call, Conference,
Private, Answer, Reject and Loudspeaker or Handset.
Lock keypad to activate the keypad lock.
Send DTMF to send DTMF tone strings, for example, passwords or bank account numbers. Key in the
DTMF string or search for it in contacts and press OK. Note that you can key in the wait character w
and the pause character p by repeatedly pressing .
Swap to switch between the active call and the call on hold, Transfer to connect a call on hold to an
active call, and disconnect yourself from the calls.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
