nokia
CONNECTING PEOPLE
PAGE 15 (26) Approved 4.0
CMO Operations & Logistics
MGR
WW Service Solutions & Development
Bochum / Germany CONFIDENTIAL 17.3.2005
17.) The SS-49 camera removal tool has two different
sides. Use side (A) to remove the Camera Module.
18.) VGA Camera Module is attached with
six snaps into
its guidance. Place the SS-49 with side (A) as shown in
the next picture and unlock the snaps on both sides.
Note release order (1. - 2.)
19.) Place SS-49 as shown in the picture and unlock the
snaps on both sides. Remember the tool side – Side (A)
20.) Remove the Camera Module with tweezers.
21.) Use a DC plug to remove DC-Jack.
22.) Remove the Vibra Motor with tweezers.
23.) Remove the Release Spring with tweezers.
24.) Remove the Release Key.
Service Manual 3200/3205n Level 1&2 Copyright © 2004-2005 NOKIA Corporation. All rights reserved.
To Next Page
Loading...
