nokia
CONNECTING PEOPLE
PAGE 11 (23) Approved 1.0
CMO Operations & Logistics
DJk
WW Service Solutions & Development
Bochum / Germany CONFIDENTIAL 16.02.2005
8. SW-UPDATE
To use FLS-4S Flash Dongle you have to follow the user guide inside the sales package. Please check always for the
latest version of flash software, which is available on
Nokia Online.
Flash Concept – (Point of Sales)
It is very important to follow this insertion and removal procedure, otherwise the contact pins of Flash Adapter
will be damaged.
1) Close MMC Lid before inserting the Flash Adapter.
2) Open the slide in arrow direction as shown in the
picture.
3) Insert the Flash Adapter like a battery, start at the
battery connector side.
4) Now, push down the phone, do not use too much force.
Move the slide towards the device to connect it with the
DC-Jack.
1) Use the shown order to remove the phone from the
Flash Adapter.
Service Manual 3230 Level 1&2 Copyright © 2005 Nokia Corporation. All rights reserved.
To Next Page
Loading...
