9 — Keypad
10 — Microphone
11 — Charger connector
12 — Nokia AV Connector (2.5 mm)
13 — Mini USB cable connector
14 — Volume down key
15 — Volume up key
16 — Power key
17 — Loudspeaker
18 — Camera lens
Switch the phone on and off
To switch the phone on or off, press and hold the power
key.
If the phone prompts for a PIN or a UPIN code, enter
the code (displayed as ****).
The phone may prompt you to set the time and date.
Enter the local time, select the time zone of your
location in terms of the time difference with respect to
Greenwich Mean Time (GMT), and enter the date.
See
"Date and time," p. 30.
When you switch on your phone for the first time, you
may be prompted to get the configuration settings
from your service provider (network service). For more
information, refer to Connect to service provider
support. See
"Configuration", p. 34, and
"Configuration setting service", p. 8.
Standby mode
When the phone is ready for use, and you have not
entered any characters, the phone is in the standby
mode.
Display
1 — Signal strength of the cellular network
2 — Battery charge status
3 — Indicators
4 — Name of the network or the operator logo
5 — Clock
6 — Display
7 — Function of the left selection key
8 — Function of the Navi key
9 — Function of the right selection key
13
To Next Page
Loading...
Need help?
General
