Nokia 3710 fold - Access codes management

Nokia 3710 fold
RM-509/RM-510
Service Manual Level 1&2
12
Confidential
 Copyright © 2009 NOKIA  All rights reserved
Version 2.0 ISSUE 1
10. DISASSEMBLY INSTRUCTIONS
1) Nokia 3710 fold disassembly. 2) You must use the Nokia Standard Toolkit version
2. You will also need the DC plug.
3) Detach and remove the D-COVER ASSY in the
direction shown.
4) Lift up the CAMERA BEZEL ASSY with the SS-93.
Be careful not to damage the CAMERA! Do not use
the CAMERA BEZEL ASSY again. Discard it.
4) Remove the CAMERA FRAME ASSY with the
tweezers. Do not use it again. Discard it.
6) To remove the CAMERA MODULE, use the dental
tool to bend the sides of the CAM S.FLEX CLIP holding
the CAMERA MODULE.
Be aware of the sharp point of the dental tool - be
careful not to injure yourself! The CAMERA MODULE
can be removed.