Nokia 3710 fold - Page 19

Nokia 3710 fold
RM-509/RM-510
Service Manual Level 1&2
19
Confidential
 Copyright © 2009 NOKIA  All rights reserved
Version 2.0 ISSUE 1
43) Note that the UI FLEX ASSY disassembly is only
for Level 3.
44) Start detaching the UI FLEX ASSY from the top
side with the SS-93.
45) Next detach the top side of the flex completely
and around the secondary camera area.
46) Turn over the phone and disconnect the MCX
CABLE connector from the UI FLEX ASSY using the
sharp end of the SS-93. Be careful not to damage
the connector!
47) Detach the flex from the C-COVER using the SS-
93 and remove it.
48) Finally, use the SS-93 to remove the adhesive
residues from the HINGE ASSY.