Nokia 3710 fold
RM-509/RM-510
Service Manual Level 1&2
27
Confidential
Copyright © 2009 NOKIA
All rights reserved
Version 2.0
ISSUE 1
37) Place the engine board as shown. Make sure the
flex put trough the gap.
38) Then connect the MCX CABLE to the engine
board with the tweezers. While closing the
connector, be careful not to damage any nearby
components.
39) Remove the protective film from the connector. 40) Turn over the engine board and place it on top
of the C-COVER ASSY. Then secure the clip on the
bottom side of the assembly.
41) Place the SIDE KEY in it´s slot. 42) Attach the KEYPAD.
To Next Page
Loading...
