Nokia 3710 fold - Page 29

Nokia 3710 fold
RM-509/RM-510
Service Manual Level 1&2
29
Confidential
 Copyright © 2009 NOKIA  All rights reserved
Version 2.0 ISSUE 1
49) Unwrap a new camera module and place it into
the camera support clip. Use fingers to press the
camera lightly until it is correctly placed.
50) Position the CAMERA ASSY into the C-Cover. Be
careful with the flex.
51) Remove the protective film from a new FLASH
LENS. Place the lens with the tweezers.
52) Peel off the protective film from a new CAMERA
FRAME ASSY. Then mount the CAMERA FRAME ASSY
correctly.
53) Replace the BATTERY COVER. 54) Remove the protective film from a new CAMERA
BEZEL ASSY. Then position the CAMERA BEZEL ASSY
onto the device and press the assy firmly to activate
the adhesive.
Nokia 3710 fold assembly is now complete.
-END OF ASSEMBLY-