Display the microcellular (MCN) indicator when in a microcellular network
Select Cell info display > On.
Tip: In a microcellular network, local calls can cost less.
The available settings may vary.
Internet connections
Define how your phone connects to the internet
Your phone automatically checks for and connects to an available known network when
a network connection is needed. Selection is based on the connection settings, unless
there are application-specific settings applied.
Select Menu > Settings and Connectivity > Settings.
Automatically switch to a known WLAN connection when available
Select Switch to WLAN > Known WLANs only.
You can also connect to WLANs manually using the WLAN wizard application.
Only use a WLAN connection
For WLAN connections when in your home network, select Data use in home country >
WLAN only. For WLAN connections when outside your home network, select Data use
when abroad > WLAN only.
Automatically use a packet data connection when in your home network
Select Data use in home country > Automatic.
To set the phone to request confirmation before connecting, select Data use in home
country > Always ask.
Request confirmation before using a packet data connection when outside your
home network
Select Data use when abroad > Always ask.
To set the phone to automatically connect, select Data use when abroad >
Automatic. Opening connections when abroad can raise data transfer costs
substantially.
Create a new access point
Select Destinations > Access point.
Change access point priority for the internet connection
1 Select Destinations > Internet.
108 Connectivity
To Next Page
Loading...
