34
A number assignment module, or NAM, consists of a phone
number and network information that the service provider
programs into your phone. When you select a NAM, you’re
not only selecting a phone number, you’re also selecting a
home system in which you will not be charged roaming fees.
The two NAMs are not equal. Some features, such as system
selection (see page 35) and network feature setting (see
page 29), are available only when the primary NAM is
selected.
Use
Menu
4 5 to select a NAM.
Send own number
This network service allows you to hide your phone number
from a person you are calling who has Caller ID. (If for some
reason your network prevents phone numbers from being
displayed, you may be able to use this feature to
show
your
number to the person you are calling.) Contact your service
provider for feature codes for showing/hiding your phone
number.
Standard method
1
Dial the feature code followed by the number you want
to call.
2
Press
Call
.
Example: If the feature code to hide your number is *67 and
the number you want to dial is (214) 555-1234, dial
*672145551234
, then press
Call
.
Menu method
You can save the feature code given by your service provider
so that
Send own number
appears in your phone’s menu,
and then use
Menu
4 4 5 to use this feature. See ‘Network
feature setting’ on page 29.
This feature must be activated before each call.
Yes
displays your number to the person you are calling.
No
prevents your number from being shown to the person
you are calling.
To Next Page
Loading...
