35
Calling card calls
Before you can make a call using a calling card, you have
to enter your calling card information into the phone.
See ‘Calling card set-up’ on page 19.
To make a call using a calling card:
1
Enter the phone number, including any prefix (such as 0
or 1) that your calling card may require when you make
a calling card call. See your calling card for instructions.
2
Press and hold
Call
for a few seconds until your phone
displays
Card call
.
3
Your phone displays
Wait for tone, then press OK
.
Wait for the tone, then press
OK
.
4
Your phone displays
Wait for tone, press OK again
.
Wait for the tone again, then press
OK
.
System selection
Your phone is capable of working in residential, private, and
public systems. You can choose how your phone selects a
network to use.
This feature is
Menu
5 in your phone. The default is
Automatic
,
which means your phone automatically searches for networks
available to you and chooses the appropriate one. Every time
you switch on your phone,
Automatic
is selected.
If you choose
Manual
, your phone displays a list of available
and unavailable networks. (You can’t use unavailable networks.)
Scroll through the choices and press
OK
when you reach the
one you want.
If you choose
New Search
, your phone begins a new search
for new private and residential systems. When it finds the
best new system, it displays it. You can then select it or start
another search by pressing
Next
.
Note: The
Manual
and
New search
features can be used
only when your primary phone number (NAM1) is selected.
See page 33.
To Next Page
Loading...
