41
Camera
Application settings — to select the size for the images shown on the display and
the font size used in drafts or text entries
Advanced — to select the default access point and the way for polling new
content from the server, to enable content to be downloaded while roaming and
all image data to be published.
10. Camera
Your device has two cameras to capture images and record video clips. A high
resolution main camera is on the back of the device, and a lower resolution
secondary camera is on the front of the device.
You can send images and video clips in a multimedia message, as an e-mail
attachment, or by using Bluetooth connectivity. You can also upload them to a
compatible online album. See “Share online,” p.39.
■ Capture images
Main camera
1. To activate the main camera, press the camera key. indicates still image
mode.
2. To zoom in or out, press the volume key.
3. To capture an image, press
the camera key. The image is
saved to Images in Gallery. To
delete the image, select
Options > Delete.
4. To close the main camera,
select Options > Exit.
Secondary camera
1. To activate the secondary camera, first press the camera key to activate the
main camera. Then select Options > Use secondary camera.
2. To zoom in or out, scroll up or down.
3. To capture an image, select Capture. The image is saved to Images in Gallery.
To delete the image, select Options > Delete.
4. To close the secondary camera, select Options > Exit.
RM-409_final_source_050508.fm Page 41 Tuesday, May 20, 2008 12:41 PM
To Next Page
Loading...
