54
Settings
Factory settings — to reset some of the settings to their original values. You need
the lock code.
Positioning (network service) — to change positioning settings.
Phone
See “Call settings,” p. 21.
Connection
Select > Settings > Phone sett. > Connection and from the following:
Bluetooth — to switch Bluetooth technology on or off, and edit Bluetooth
settings. See “Bluetooth connection settings,” p. 61.
USB — to edit USB settings. See “USB connection,” p. 62.
Destinations — to define the connection methods used for reaching a particular
destination
Packet data — to select the packet data connection settings. The packet data
settings affect all access points using a packet data connection.
• To set the device to register to the packet data network when you are in a
network that supports packet data, select Packet data connection > When
available. If you select When needed, the device uses a packet data
connection only if you start an application or function that needs it.
• To set the access point name to use your device as a modem with your
computer, select Access point.
• To enable the use of HSDPA (network service) in UMTS networks, select
High speed packet access. When HSDPA support is activated, downloading
data such as messages, e-mail, and browser pages through the cellular
network may be faster.
Data call — to set the online time for the data call connection. The data call
settings affect all access points that use a GSM data call.
Video sharing — to set your SIP profile settings manually. See “Video sharing
settings,” p. 23.
SIP settings — to view and edit session initiation protocol (SIP) profiles. See “Video
sharing,” p. 23.
Configurations — to view and delete configuration contexts. Certain functions,
such as web browsing and multimedia messaging, may require configuration
RM-409_final_source_050508.fm Page 54 Tuesday, May 20, 2008 12:41 PM
To Next Page
Loading...
