Nokia 6 Udhëzues Përdorues
Do not connect to products that create an output signal, as this may damage the device. Do
not connect any voltage source to the audio connector. If you connect an external device
or headset, other than those approved for use with this device, to the audio connector, pay
special attention to volume levels.
Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not
place credit cards or other magnetic stripe cards near the device for extended periods of time,
since the cards may be damaged.
INSERT OR REMOVE SIM AND MEMORY CARD
Insert SIM and memory card
1. Open the SIM tray and memory card tray by putting the provided tray opener into the holes
next to the trays.
2. Put the nano-SIM into slot 1 located on the tray with the contact area face down. If you have
a dual SIM variant, you can either put a second SIM or a memory card into slot 2. If you have
a single SIM variant, you can only put a memory card into slot 2.
3. Slide the SIM and memory card tray back into place.
1
Note: If you have a dual SIM phone with only one SIM tray, you cannot use two SIM cards and a
memory card at the same time.
Remove SIM and memory card
Open the SIM and memory card trays, remove the cards, and slide trays back into their
respective slots.
1
Use only original nano-SIM cards. Use of incompatible SIM cards may damage the card or the device,
and may corrupt data stored on the card.
© 2021 HMD Global Oy. Të gjitha të drejtat të rezervuara. 7
To Next Page
Loading...
Need help?
General
